 |
60 days
100
12 Months
| OEM / Reference |
|---|
| 2452U426S1 |
| Brand | Model |
|---|---|
| KOBELCO | SK200-3 |
| Item | Details |
|---|---|
| Overall Dimensions | 836 × 880 mm |
| Inlet Diameter | 50 mm |
| Outlet Diameter | 50 mm |
Elecdura supplies this aftermarket radiator for wholesalers, distributors, and dealer inventory programs. Reference numbers are used for product identification only. This product is not supplied as a genuine OEM part.
| Item | Details |
|---|---|
| Minimum Order | 100 pcs per model |
| Lead Time | 60 days |
| Warranty | 12 months |
The connection details for reference 2452U426S1 are Inlet Diameter: 50 mm; Outlet Diameter: 50 mm. Compare both the connection sizes and their physical positions with the existing radiator before ordering for KOBELCO SK200-3.
For the 2452U426S1 radiator, the dimensional information is Overall Dimensions: 836 × 880 mm. Compare these measurements with the existing radiator and include them in the inquiry when several units for KOBELCO SK200-3 look similar.
The 2452U426S1 radiator applies to KOBELCO SK200-3. For wholesale ordering, use the full machine designation and any available engine, chassis, or year detail rather than the model family alone. The physical connection layout should also agree with the existing radiator.
Cooling performance that falls as the machine remains under load, visible leakage around the inlet and outlet, and blocked, flattened, or oil-contaminated fins are common warning signs. A damaged core can continue losing efficiency even when coolant level and fan operation are otherwise normal.
A complete inquiry should include reference 2452U426S1, the application KOBELCO SK200-3, order quantity, and clear photos showing the upper and lower hose connections. Include Inlet Diameter: 50 mm. If the order needs custom labeling or packing, state those details at the same time.
The standard minimum order is 100 pcs per model, the normal lead time is 60 days, and the warranty period is 12 months for the 2452U426S1 radiator used on KOBELCO SK200-3. Distributors should finalize the model quantity and packing instructions before placing the order.
