Latest News

Read More

Read More

Read More

Choose new or remanufactured A/C compressors using core, contamination, process, testing, and warranty evidence—not price alone. Read More

Turn normalized cooling-system trends into timely inspections, defensible work orders, and better parts decisions. Read More

Identify EV heat exchangers by their media, duty, ports, pressure boundary, and verified application evidence. Read More

Match EV heating parts by architecture, interfaces, and evidence—not by the heat-pump or PTC label alone. Read More

Radiator filler neck damage can prevent a verified radiator cap from sealing, holding pressure or routing coolant correctly. The cap and neck form a two-part pressure-control interface: the lower seal must contact its seat, the upper gasket must close the mouth where the design requires it, the bayonet tabs must pull t Read More

A heavy-duty radiator core row count is not a simple quality grade. Adding a row may increase coolant-side surface area, but it also increases core depth, air-path resistance, coolant volume, mass and the distance that heated air must travel. If the fan, shroud, grille opening or under-hood discharg Read More

An intake manifold plenum seam leak occurs where two molded shells, a cover plate or another permanently joined section no longer maintains the intended air boundary. It differs from a manifold-to-head gasket leak because the escaping smoke or entering unmetered air follows the body joint rather tha Read More

Intake manifold flange warpage should be demonstrated with repeatable geometry and sealing evidence, not declared from a gap seen while the part rests on a bench. A composite manifold is flexible, contains molded ribs and metal inserts, and may change shape when bolts, brackets, fuel hardware or an actuator are installIntake manifold flange warpage should be demonstrated with repeatable geometry and sealing evidence, not declared from a gap seen while the part rests on a bench. A composite manifold is flexible, contains molded ribs and metal inserts, and may change shape when bolts, brackets, fuel hardware or an Read More

Read More